Applications

Gas

Polyethylene is the standard material for gas distribution. Typical pressure ratings reach 80 psi for MDPE and 125 psi for HDPE.

Gas
01

Gas distribution

Polyethylene pipe for gas distribution is produced from 1 to 24 inch in diameter. In the United States its use is governed by 49 CFR 192; in Canada by CSA Z662. Where pressures exceed the limits of polyethylene, approved polyamide systems are used.

  • Natural gas distribution
  • LPG systems
  • Propane gas piping
  • Yard gas piping
02

Yellow PE gas pipe

Yellow PE gas pipe: a coil strapped for transport, coils stacked in a yard and a bundle of straight lengths
PE 80 gas pipe is extruded in yellow for identification, in coils and straight lengths.
03

Pipe colours

Gas pipe is made from 20 mm to 1,200 mm in outside diameter and joined by butt fusion.

  • 01

    PE 100 orange

  • 02

    PE 80 yellow

  • 03

    PE 100 black with orange stripes

04

Dimensions and weights

Wall thickness and weight per metre for the gas pipe sizes in the data sheet. PE 100 SDR 11 is pressure class PN 16; PE 100 SDR 17, used for water, is PN 10.

Gas pipe wall thickness s and weight per metre

Gas pipe wall thickness s and weight per metre
PE 100 SDR 11PN 16PE 80 SDR 17.6PN 6PE 80 SDR 11PN 10
Outside diameter, mm
323.00.2822.00.1983.00.282
635.81.063.60.6955.81.06
908.22.145.11.48.22.14
12511.44.127.12.6911.44.12
18016.48.5110.25.5416.48.51
25022.716.314.210.722.716.3
31528.625.917.916.928.625.9
35532.232.920.121.432.232.9

Source: ALROWAD gas pipe data sheet (page 2 of the PE 80 data sheet). Pressure classes from the PE 100 sheet (C = 1.25) and the PE 80 sheet (C = 1.6).

Next step

Other applications