Pipe
PE100 · DN110
- Outer Ø
- 110 mm
- Wall
- 10.5 mm
- Length
- 418 mm
PE100 HDPE pipes and fittings
Pressure-rated HDPE fittings,moulded to hold.
Pipes, elbows, tees, crosses and reducers for water, gas and industrial networks.
01 CatalogueScroll
- HDPE Pipe, PE100 · DN110. Outer Ø 110 mm, Wall 10.5 mm, Length 418 mm.
- HDPE Elbow 45°, PE100 · DN110. Outer Ø 110 mm, Bend radius 94 mm, Collar 61 mm.
- HDPE Elbow 90°, PE100 · DN110. Outer Ø 110 mm, Bend radius 94 mm, Collar 61 mm.
- HDPE Tee, PE100 · DN110. Outer Ø 110 mm, Run 319 mm, Branch 165 mm.
- HDPE Cross, PE100 · DN110. Outer Ø 110 mm, Run 330 mm, Branch 165 mm.
- HDPE Reducer, PE100 · DN110 × DN75. Large end Ø 110 mm, Small end Ø 75 mm, Length 220 mm.
01/06
Scroll: each fitting completes a full turn before the next arrives
Fields of application
Where the pipe goes to work.
01IrrigationIrrigationHDPE pipe for irrigation and water systems resists corrosion and weather, and its flexibility cuts the number of fittings a network needs.
02WaterWaterPE pipes for potable water are extruded from virgin polyethylene resins with carbon black for UV resistance, to DIN 8074 and DIN 8075.
03Fire fightingFire fightingPolyethylene piping for underground fire-fighting systems, manufactured to ISO and DIN 8074 and DIN 8075.
04GasGasPolyethylene is the standard material for gas distribution. Typical pressure ratings reach 80 psi for MDPE and 125 psi for HDPE.
05Fish cagesFish cagesHDPE floating cages for aquaculture. Each project starts with an assessment of the site and the species.
06LiningLiningA damaged or worn pipeline renewed from the inside: a continuous polyethylene pipe is pulled into the old one between two pits, with no open trench along the route.
Sectors
Four sectors, one supply chain.
How we compete
We compete on total solution and product development, not on price.
A total-solution and product-development company, not only a pipe factory.
01BTS
Best total solution
One system, delivered complete.
- Pipe, fittings, welding and installation support
- Technical submittal and design support
- Training and supervision on site
02BTC
Best total cost
The best cost over the service life, not the lowest price.
- Consistent quality that reduces waste
- Ready stock
- Fewer installation and downtime problems
03DP
Develop product
Products that create a competitive advantage.
- Anti-UV formulations
- Anti-counterfeiting and traceability
Direction by sector
- Potable waterBest total cost, moving to best total solution
- InfrastructureBest total solution
- Gas distributionBest total solution plus product development
- Agriculture and irrigationBest total cost
Standards
Standards we manufacture to.
| Standard | Applies to |
|---|---|
| DIN 8074/8075 | Pipes |
| EN 12201 | Pipes, fittings |
| ISO 4427 | Pipes, fittings |
| ES 1832 | Pipes, fittings |
| EN 1555 | Gas pipes |
Datasheets · Pressure classes · Custom sizes